Trainings@Subodh
ST organizes Training programs on Metallography Principles and Laboratory Practice as well as Mechanical Properties of Metals.
ST has succesfully conducted training programs at its Training Facility in Rabale, Navi Mumbai, India.
Metallography Principles and Laboratory Practice
COURSE CONTENTS
· Basics of Metallography and Microstructure, Macrostructure, Specimen Preparation and Etching
· Optical microscopy principles
· Iron Carbon Diagram, Microstructure Phases
· Carbon Steel Microstructure
· Effect of alloying elements
· Effect of hot working & cold working
· Cast iron, S G Iron
· Quantitative Microscopy
· Grain Size, Inclusion Rating, Decarb, Case Depth, Coating Thickness, ASTM E 112, E45, E 1077, E 562
· Metallurgy & Microstructure of Fe-Cr-Ni alloys , Stainless steels, DSS , High Nickel alloys
· Heat Treatment Practices, Structure Property co-relations
· Metallography as Quality control tool & RLA studies
· Welding Metallurgy and Structure examination
· Non-Ferrous Alloys Metallurgy
Aluminum alloys, Copper alloys, Titanium alloys, Zirconium alloys.
Structure Properties relation
· Laboratory Practical
· Case Studies and RLA concept
Localised Corrosion in Stainless Steel
COURSE CONTENTS
· Session I: Basics of Corrosion and its Control
o Electrochemical nature of corrosion
o Forms & Mechanism of Corrosion
o Methods for corrosion prevention and control
· Session II: Introduction to Stainless Steel
o What is SS and what makes it Stainless?
o Effects of alloying elements (Ferrite and Austenite Stabilizers)
o Classification of Stainless Steels
o Selection Criterion for SS Types and Grades
· Session III: Localised Corrosion of Stainless steels
o Basic Mechanisms of Pitting Corrosion, Crevice Corrosion , IGC and SCC
o Weld-Induced Localised Corrosion
o Surface contaminants-Induced localised corrosion
· Session IV: Test Methods for assessing susceptibility to localised corrosion
o Pitting and Crevice Corrosion Tests
o IGC Tests
o SCC Tests
o Detection of Intermetallic phases
· Session V: Metallurgical failure analysis
o Methodology
o Case Studies of Localised Corrosion Failures
WHO SHOULD ENROLL
· QA/QC Engineers/ Managers
· Third Party Inspection agency surveyors
· Personnel involved in Fabrication, Heat Treatment, Forge shops, Foundries
· Welding Engineers
· Laboratory Personnel
· Metallurgical / Materials Engineers
· And anyone who need a working understanding of Corrosion in SS and their testing.
ABOUT SUBODH TECHNOLOGISTS
Subodh Technologists is a premier Material Testing Laboratory at Navi Mumbai. The Lab has state-of-the-art testing facility for Material Characterization, Corrosion Studies, Metallography, Mechanical Testing and Failure Analysis.
Accredited by NABL (National Accreditation Board for Testing and Calibration Laboratories), Department of Science and Technology, Government of India and with CRISIL 'SE2A' Rating, the Lab is proud to deliver quality testing services that run the gamut of materials’ analysis.
Mr. Sudhakar Bonde, a metallurgical engineer from I.I T Kanpur is the CEO and has vast experience in Metallurgical Field.
MECHANICAL PROPERTIES AND TESTING
COURSE CONTENTS
· Basic principles of Metallurgy
o Metallurgical Characteristics controlling properties
o Strengthening Mechanism
o Guidelines for selection of materials
· Tensile Properties and Testing
o Basics of Elastic& Plastic Deformation
o Strain Hardening & Strain Rate Hardening
o Concept of Safety Factor
o Material & Test Variables affecting Tensile Properties
· Hardness Test
o Basics of Indentation Hardness Test
o Macro v/s Micro Hardness
o Guidelines for accurate Hardness Test
· Bend Test
o Test Variables v/s Bend Ductility
o Bend Test for Welding Qualifications
· Impact Toughness Test
o Ductile v/s Brittle Fracture
o Toughness Test parameters for Characterizing susceptibility to Brittle Fracture
· Fatigue, Creep and Stress Rupture Test
o Basic Concepts & Test methodologies
*Practical Demo for various mechanical tests.
WHO SHOULD ENROLL
· QA/QC Engineers/ Managers
· Third Party Inspection agency surveyors
· Personnel involved in Fabrication, Heat Treatment, Forge shops, Foundries
· Welding Engineers
· Laboratory Personnel
· Metallurgical / Materials Engineers
· And anyone who need a working understanding of mechanical properties of metals and their testing
ABOUT SUBODH TECHNOLOGISTS
Subodh Technologists is a premier Material Testing Laboratory at Navi Mumbai. The Lab has state-of-the-art testing facility for Material Characterization, Corrosion Studies, Metallography, Mechanical Testing and Failure Analysis.
Accredited by NABL (National Accreditation Board for Testing and Calibration Laboratories), Department of Science and Technology, Government of India and with CRISIL 'SE2A' Rating, the Lab is proud to deliver quality testing services that run the gamut of materials’ analysis.
Mr. Sudhakar Bonde, a metallurgical engineer from I.I T Kanpur is the CEO and has vast experience in Metallurgical Field.
Kindly email to info@subodhlabs.net to get the latest training schedule